Skip to content
5,000+ phones repaired • FREE tracked Royal Mail postage • Warranty on every repair • Need help?
5,000+ phones repaired FREE tracked Royal Mail postage Warranty on every repair (terms) Harlow workshop • UK-wide postal repairs Need help? Contact us

Apple Pencil Not Connecting? Bluetooth and Charging Checks

10/10/2026 by James Waterston

Your Apple Pencil can sit beside your iPad looking fine, yet refuse to pair or draw a line. An Apple Pencil not connecting usually needs a compatibility, charging, Bluetooth or iPadOS check before you suspect broken hardware.

Start with the connection method, as different Pencil models pair differently. Check compatibility, charging, Bluetooth and iPadOS in that order, stopping when the Pencil responds again.

Key Takeaways

  • Check that your Apple Pencil model is compatible with your iPad and use its correct pairing and charging method.
  • Charge the Pencil, switch Bluetooth on in Settings, and reconnect it. If an old pairing appears, forget the device and pair it again.
  • Restart the iPad and install any available iPadOS update before trying settings resets.
  • If the Pencil connects but won’t write, tighten or replace its tip and test it in Apple Notes. Try another compatible iPad or Pencil to help identify a hardware fault.

1. Match the Apple Pencil to the iPad

Open Settings > General > About and find your iPad’s Model Name. Then identify your Pencil: the first generation has a removable cap, whilst the USB-C version has a sliding end.

Apple’s Apple Pencil compatibility list makes an important distinction: newer iPads don’t automatically support older Pencils.

Apple Pencil modelCompatible iPadsPairing and charging method
1st generationiPad 6th to 9th generations, 10th generation and A16; mini 5; Air 3; Pro 9.7-inch, 10.5-inch and 12.9-inch 1st or 2nd generationRemove the cap and insert the Lightning connector. On iPad 10th generation or A16, use a USB-C cable and USB-C to Apple Pencil Adapter.
2nd generationmini 6; Air 4 or 5; Pro 11-inch 1st to 4th generations; Pro 12.9-inch 3rd to 6th generationsAttach to the magnetic connector on the iPad’s side.
USB-CUSB-C iPads: iPad 10th generation or A16; mini 6 or A17 Pro; Air 4, 5 or M2/M3/M4; compatible Pro 11-inch, 12.9-inch and 13-inch modelsSlide open the end and connect directly to the iPad using a USB-C cable.
ProPro 11-inch or 13-inch M4/M5; Air 11-inch or 13-inch M2/M3/M4; mini A17 ProAttach to the magnetic connector for pairing and charging.

The USB-C Pencil needs iPadOS 17.1.1 or later. Pencil Pro requires iPadOS 17.5 or later. Check that your iPad runs the minimum iPadOS version required by its Pencil model.

The USB-C Pencil doesn’t need the Apple Pencil Adapter. Magnetic attachment only stores that model; it doesn’t charge it.

A triptych showing three stylus and tablet connection methods on a pale background.

2. Give the Pencil a proper charging connection

Use the right connector

For a first-generation Pencil, follow Apple’s Lightning and adapter charging instructions for the Lightning connector. On a USB-C iPad, connect the Pencil to the adapter, then connect the adapter to the iPad using a USB-C cable.

For second-generation and Pro models, remove any case that obstructs the magnetic edge. Centre the Pencil along the connector.

Apple’s USB-C Pencil specifications confirm that this model charges through a USB-C cable. Use a known-good cable that supports both charging and data for pairing.

If the Pencil is fully drained, leave it connected for 10 to 15 minutes before retrying. It doesn’t need to reach 100%.

Watch what happens to the battery

Once the Pencil connects, check its battery percentage in the Batteries widget or Apple Pencil settings. If the battery level rises, you know it can charge.

We’ve previously traced a MacBook Air charging complaint to packed lint and a worn cable, rather than the suspected battery. The same diagnostic principle applies here: rule out the connection first.

If your tablet also won’t charge, our iPad charging fault checks address that separate problem. Don’t force a crooked connector or probe the port with metal.

A white stylus attached to the magnetic charging edge of a grey tablet on a wooden surface.

3. Fix an Apple Pencil not connecting over Bluetooth

If the Pencil doesn’t appear

Open Settings > Bluetooth and switch Bluetooth on. Use Settings rather than the Control Centre button.

Next, physically reconnect the Pencil using the method in the table. Leaving it beside the iPad won’t start pairing.

Tap Pair when prompted. For the USB-C model, the prompt may say Tap to Connect instead. If nothing appears after charging, Apple Support’s Pencil pairing troubleshooting recommends reconnecting and restarting before seeking service.

If an old pairing appears

Under My Devices, tap the information button beside Apple Pencil. Select Forget This Device, then confirm.

Reconnect the Pencil physically and accept the prompt again. Forgetting it removes the saved accessory relationship without deleting notes, photos or apps.

If you recently used the Pencil with another compatible iPad, it may need pairing again with this one. Some models also need reconnecting after Bluetooth is switched off or the iPad restarts.

4. Restart the iPad, then update iPadOS

Try a normal restart before forcing one

Restart the iPad normally first, then reconnect the Pencil. We reserve a force restart for a frozen iPad or a pairing problem that survives a normal restart.

On an iPad without a Home button:

  1. Quickly press and release the volume button nearest the top button, usually volume up.
  2. Quickly press and release the other volume button, usually volume down.
  3. Hold the top button until the Apple logo appears.

Button position matters because newer iPads can change volume-button behaviour with orientation. On Home-button models, hold Home and the top button until the logo appears.

A force restart doesn’t erase your data.

Install an available software update

Go to Settings > General > Software Update. An iPadOS update can fix accessory detection or Bluetooth bugs.

Back up first and keep the iPad powered during iPadOS installation. A download can take 30 to 45 minutes on a slower connection, but there’s no fixed duration.

If the tablet cannot finish starting, follow our iPad startup troubleshooting steps instead of repeatedly trying to pair an accessory.

5. If it connects but won’t write, check the tip

Tighten the replaceable nib gently

The screw-on writing tip is plastic, with metal components underneath. If it’s loose, turn it clockwise until snug, using your fingers.

Don’t overtighten it. To remove a damaged or worn nib, turn it anticlockwise and fit a replacement.

A tip problem can stop strokes registering even when Bluetooth and charging work normally. Tightening the nib won’t make an incompatible Pencil pair.

If damage exposes metal at the writing end, stop using it until you’ve replaced the tip. Pressing harder risks scratching the screen.

Test Notes before changing more settings

Open Apple Notes, select a drawing tool and try several strokes across the screen. Then test another Pencil-compatible app.

If Notes works, check whether the original app supports your current iPadOS version. Then investigate its tool selection or settings. For handwriting inside text fields, enable Settings > Apple Pencil > Scribble.

Scribble controls handwriting-to-text features. It isn’t required for drawing, and switching it on won’t repair a Bluetooth connection.

A tablet corner, a stylus with exposed metal threads at the tip, and a small replacement nib on a neutral surface.

6. Leave settings resets until the simpler checks fail

Reset Network Settings has a limited role

Find this under Settings > General > Transfer or Reset iPad > Reset > Reset Network Settings.

It removes saved Wi-Fi networks and passwords, plus relevant network and non-managed VPN settings. It doesn’t delete your photos or apps.

However, don’t treat it as a guaranteed way to clear Bluetooth accessory pairings. Find the saved Pencil under My Devices in Bluetooth settings and choose Forget This Device to remove a stale pairing. We wouldn’t make a network reset the next step for an isolated Pencil fault.

Reset All Settings changes much more

Reset All Settings, in the same menu, returns system preferences to defaults. It resets network, privacy and other settings, and removes Apple Pay cards.

Your personal content and apps remain, but you’ll spend time setting preferences up again. Back up beforehand, particularly if the iPad has other faults.

Neither reset fixes physical damage or incompatibility. Avoid Erase All Content and Settings for routine Pencil troubleshooting, because that option deletes your data.

7. Separate a faulty Pencil from an iPad hardware fault

If possible, try the Pencil on another compatible iPad. Then try a known-working, compatible Pencil on yours.

A Pencil that fails on both tablets points towards the Pencil. If two working Pencils fail on your iPad, the tablet needs assessment. Neither result proves which internal component has failed.

Pay attention to the pattern. Missing strokes in the same screen strip, visible cracks or a bent frame suggest a screen-side fault. The touch-sensing layer can develop problems even when the picture looks normal.

On an M2 11-inch Air, our iPad Air 6 hardware repair options cover the tablet rather than the Pencil accessory.

Stop charging if anything becomes unusually hot, smells burnt or has visible liquid damage. Don’t keep bending a cable to make it work.

For a Pencil that still won’t pair, contact Apple Support or arrange a Genius Bar assessment. Apple’s one-year limited warranty covers eligible manufacturing faults, not every kind of damage; UK consumer rights may also apply.

Frequently asked questions

Why is the Pencil missing from Bluetooth settings?

It may be out of charge or its model-specific pairing may not have completed. If it appears under “My Devices”, forget it there, then reconnect it.

Can Apple Pencil tips be replaced?

Yes. Unscrew the plastic nib anticlockwise, then screw a replacement clockwise until snug. Replace a cracked or badly worn tip rather than pressing harder.

Does magnetic attachment mean the Pencil is compatible?

No. The USB-C Pencil attaches magnetically for storage without wireless charging. Also, second-generation and Pro Pencils support different iPads despite their similar appearance.

Get the connection working before assuming damage

We recommend checking compatibility and power before removing pairings or changing settings. Those checks separate a connection problem from a likely hardware fault without putting your data at risk.

If the tablet itself needs attention, our 13-inch iPad Air 6 repair page includes booking for that model. For other supported iPads, tell us which model you have and what happened during these checks, so we can help you choose the right next step.