Skip to content
5,000+ phones repaired • FREE tracked Royal Mail postage • Warranty on every repair • Need help?
5,000+ phones repaired FREE tracked Royal Mail postage Warranty on every repair (terms) Harlow workshop • UK-wide postal repairs Need help? Contact us

MacBook Screen Vertical Lines: Causes and Repair Signs

31/10/2026 by James Waterston

Vertical lines on your MacBook screen usually point to a software glitch, a display connection problem or failing hardware. They don’t automatically mean you need a new screen, although persistent stripes deserve attention.

We recommend isolating the fault before replacing parts. A screenshot and an external monitor can narrow things down without opening the laptop.

If there’s no liquid exposure or obvious physical damage, start with those comparisons, then work through the software checks below.

Protect your files before troubleshooting

If the MacBook works normally apart from the lines, back up important files. Use Time Machine with an external drive, or copy essential documents somewhere you can access independently. An external monitor may help if the built-in display is difficult to read.

However, liquid exposure changes the advice. Shut down, disconnect the charger and don’t switch the laptop back on until it’s assessed. Corrosion can cause display faults days or weeks after a spill.

Don’t press the panel, twist the lid or repeatedly move it to find an angle where the lines disappear. That can worsen cable or panel damage.

If the case bulges, the trackpad lifts or the laptop becomes unusually hot, stop using it. Those symptoms need assessment before further testing. Also avoid running updates on an unstable machine that keeps shutting down.

Compare a screenshot with an external monitor

These tests help separate faults in the displayed image from faults in the screen showing it. Neither identifies the failed component on its own.

Capture the lines with Shift + Command + 3

Press Shift + Command + 3, then view the saved image on another device. Looking at it on the affected screen won’t help because the same stripes remain over everything.

If the image looks clean elsewhere, suspect the built-in display, its cable or a fault later in the graphics output path.

If the lines appear in the saved image, investigate the app, macOS or graphics processing. This doesn’t prove software is responsible because graphics hardware can also produce corrupted images.

Connect a known-working screen

Connect a TV or monitor using a suitable cable or adaptor. Ideally, mirror the displays so both show the same content.

A clean external picture alongside stripes on the MacBook points towards the internal display assembly or ribbon cable. If both show corruption, software, graphics hardware or the logic board become stronger suspects.

However, displays can use different output paths. We treat this comparison as evidence, rather than a final diagnosis. A faulty external cable can also confuse the result.

A laptop with colorful vertical lines on its screen sits next to a separate monitor showing a landscape.

Rule out software before assuming screen damage

Restart and compare applications

Save your work and restart normally. If the lines disappear, watch for recurrence before assuming the problem has gone.

Lines confined to one application suggest an app-specific issue. Quit it, reopen it and install any available app update. By contrast, stripes that remain in identical positions across applications make display hardware more likely.

Lines visible during startup, before login, also strengthen the hardware suspicion. However, persistence after one restart doesn’t identify which component has failed.

Update macOS after backing up

Open System Settings > General > Software Update. Apple’s macOS update instructions explain the supported process.

Once your backup is complete, install an available macOS update, particularly before a major version upgrade. Updates can fix graphics bugs, but they won’t repair a damaged LCD panel or cable.

Before following startup instructions, open Apple menu > About This Mac. A named Apple chip means Apple silicon; an Intel processor means you need the Intel instructions.

Start in Safe Mode

On an Intel-based MacBook, restart and immediately hold Shift until the login screen appears.

On Apple silicon, shut down, then hold the power button until startup options appear. Select the startup disk, hold Shift, then choose Continue in Safe Mode.

Apple’s Safe Mode guidance covers both routes. If the lines disappear, startup software becomes a stronger suspect. Return to normal startup afterwards and investigate recently installed login items or display utilities.

Run Apple Diagnostics and relevant Intel resets

Record diagnostic reference codes

Disconnect unnecessary accessories first. Leave power connected and place the MacBook on a stable surface with ventilation.

On Apple silicon, shut down and hold the power button until startup options appear, then press Command-D. On Intel, restart and immediately hold D.

Follow the prompts and photograph any reference codes. Apple’s Apple Diagnostics instructions explain the process.

Apple Diagnostics may return ADP000, meaning the test detected no issues. A clean result doesn’t rule out every intermittent display or cable fault. Persistent stripes still need investigation.

Use resets only where they apply

On Intel MacBooks, an NVRAM reset can help with certain display-setting glitches. Restart while holding Option + Command + P + R for about 20 seconds.

An SMC reset can help some Intel power, backlight or sleep problems. However, the procedure differs between models, including those with Apple’s T2 chip.

Apple silicon Macs don’t use those Intel reset procedures. Repeated resets won’t repair a cracked panel or worn ribbon cable.

Recognise cable damage and LCD failure

Lines that change with the lid angle

If ordinary lid movement changes the lines or makes the screen cut out, suspect a display cable or connection fault. Note whether the symptom changes at a particular lid angle, and report it rather than repeatedly reproducing it.

Terms such as “Dustgate” and “Flexgate” describe different cable-related fault patterns. Wear, trapped debris and repeated flexing can damage delicate display connections. However, the original Flexgate issue concerned backlight cables, so vertical stripes alone don’t diagnose Flexgate.

A common diagnostic scenario is flickering that initially looks like a failed screen but comes from its connection. We favour testing that connection before approving an entire display assembly.

Technical diagram showing an illustrated cutaway of a laptop hinge and internal flexible ribbon cable.

Fixed stripes, black patches and impact marks

A drop can damage the display panel beneath intact outer glass. Pressure from an overloaded bag or an object trapped under the lid can do the same.

Fixed coloured lines, such as green lines, spreading black patches and visible pressure marks strongly suggest panel damage. Damage may become obvious immediately or develop later.

Excessive heat can also damage electronics, although a warm chassis alone doesn’t identify a screen fault. Impact or liquid exposure can affect connectors and board circuitry as well as the panel.

A clean outer surface doesn’t rule out damage underneath. The glass can survive an impact that damages the LCD.

Decide whether the display needs replacing

Match the repair to the failed component

A professional repair can test the cable or connector before deciding whether the full display assembly needs replacing. Some cables form part of the assembly, so a separate cable replacement isn’t always practical.

A damaged LCD usually needs screen repair through panel replacement. On many Retina MacBooks, integrated display layers and model-specific construction make replacing the full unit more practical than separating individual parts.

We weigh the repair cost against the laptop’s age, condition, battery health and usefulness. A working MacBook with one isolated display fault presents a different decision from an older machine with several problems.

Separate warranty faults from accidental damage

Manufacturing defects may fall under Apple’s warranty. Drops, lid pressure and spills generally count as accidental damage, which AppleCare+ treats separately and may involve an excess.

UK consumer rights against the retailer are separate from a manufacturer’s warranty. They don’t make accidental damage a manufacturing fault.

Apple’s Mac support options include warranty and AppleCare routes. Warranty coverage depends on the cause and applicable terms, so vertical lines alone don’t establish a free repair.

A creator’s account of a 2018 13-inch MacBook Pro described AppleCare repair without charge and a return in about five days. That’s one reported outcome, not a promise of free repair or a standard turnaround.

Key takeaways before arranging repair

We’d keep these points in mind when deciding what to do next:

  • Compare a screenshot viewed elsewhere with a known-working external display.
  • Stop home troubleshooting after liquid exposure, swelling or obvious structural damage.
  • Persistent lines strengthen the hardware suspicion, but don’t identify the failed part.
  • Back up accessible files before updates or repair.
  • Give the technician the exact model, damage history and results of your comparisons.

That information helps avoid replacing an expensive assembly when the fault lies elsewhere.

Questions about MacBook screen lines

Can vertical lines disappear without repair?

Yes, if an app or macOS glitch causes them. Restarting, updating or removing troublesome startup software may resolve that fault.

However, lines caused by physical panel damage or a damaged cable generally need repair. An intermittent fault can temporarily disappear without the underlying damage improving. We wouldn’t treat a brief return to normal as proof that hardware is healthy.

Does a black screen mean the MacBook has died?

No. A failed display, backlight or cable can leave a functioning MacBook looking completely dead. Keyboard lighting, startup sounds or a working external display can help distinguish those situations.

A MacBook that won’t turn on or charge needs power diagnosis too. We avoid assuming that every black screen needs a replacement display.

Are files usually lost when the screen fails?

A display fault doesn’t normally erase stored files. However, liquid damage or a logic board problem may affect access to them.

A backup remains important because screen symptoms don’t prove the rest of the machine is healthy. If the data matters and no backup exists, explain that before any work begins.

Get the fault identified before replacing parts

Screen lines are a symptom, not a parts list. The useful distinction is whether the problem starts in software, graphics processing or the built-in display path.

We recommend stopping once testing points to hardware rather than trying increasingly forceful fixes. If you’d like help interpreting those results before arranging professional repair, share the model, the lines and any recent impact or spill with Phone Repair Direct.