Skip to content
5,000+ phones repaired • FREE tracked Royal Mail postage • Warranty on every repair • Need help?
5,000+ phones repaired FREE tracked Royal Mail postage Warranty on every repair (terms) Harlow workshop • UK-wide postal repairs Need help? Contact us

Does Rice Actually Dry Out a Wet Phone?

10/11/2026 by James Waterston

The wet phone rice trick isn’t a reliable way to dry a phone, and Apple advises against it. Switch it off and don’t charge it: rice can’t remove corrosive residue.

We know you’ll be worried about your photos and whether the phone is salvageable. Water damage doesn’t automatically mean the phone is finished, but the next steps matter.

Key takeaways

Keep it off, blot the outside and use room-temperature airflow. Avoid rice, heat and charging tests. Saltwater, sugary drinks or developing faults need prompt assessment.

Why rice isn’t a reliable wet-phone fix

What the drying tests found

In Gazelle’s 2014 drying experiment, ordinary uncooked rice absorbed the least moisture amongst seven materials tested on wet sponges over 24 hours. Open air outperformed every drying agent.

In its separate phone test, all five Samsung Galaxy S III handsets recovered. Only one of four iPhones, three iPhone 4 models and one iPhone 3GS, restarted. These small, older-device tests don’t establish recovery rates for modern phones.

Why apparent recoveries mislead

Rice absorbs some moisture, which explains its reputation. However, a phone recovering whilst sitting in rice may simply have benefited from evaporation.

Apple warns that rice can introduce damaging particles into an iPhone. Rice also works too slowly to prevent corrosion, which can begin within minutes around powered, contaminated components.

What to do in the first few minutes

A smartphone lying on a towel with a phone case and SIM tray nearby, and a small fan in the background.

We recommend this sequence rather than testing whether the phone still works.

  1. Power off the phone immediately. If it’s already off, leave it off. Disconnect charging cables safely because electricity through wet components risks short circuits and faster corrosion.
  2. Remove the case and accessories. Blot the exterior with a soft, lint-free cloth without rubbing liquid into openings.
  3. Once the exterior is dry, remove the SIM tray and memory card where fitted. Remove batteries and back covers only if they’re designed for user removal. Don’t prise open a sealed handset.
  4. Hold ports, speakers and button openings downwards. Gently tap against your hand to drain loose water, without vigorous shaking.
  5. Leave it somewhere dry with room-temperature airflow. A fan blowing across it can help. Avoid charging and repeated button presses.

Apple’s liquid-detection guidance also rules out external heat, compressed air and cotton buds inside the connector. A hairdryer or another heat source can overheat components or force moisture further inside.

Silica gel, airflow and conflicting DIY advice

A flat lay showing a smartphone on a damp cloth, a bowl of silica gel beads, and a pile of uncooked rice.

Silica gel can’t clean contamination

Silica gel is a desiccant that absorbs moisture more effectively than ordinary rice. It may reduce humidity in a closed container, but neither silica gel nor rice can clean contamination beneath connectors.

Gazelle suggested at least four US cups (about 950 ml) of silica gel or instant rice in a roughly 1 to 2-litre container. That historical recommendation doesn’t prove either method beats airflow inside modern sealed phones. Conventional uncooked rice performed poorly.

Older rescue tips need caution

Gazelle also suggested shaking, blowing or vacuuming out water, then opening the phone near a fan. We recommend gentle drainage and leaving internal opening to a technician instead.

A 24 to 48-hour soak using instant rice provides no reliable recovery deadline. Forum suggestions of warmth around 43°C to 49°C and debated isopropanol rinses aren’t suitable home instructions. Use room temperature and don’t pour solvents into the phone.

When a dry phone still needs diagnosis

Saltwater and sugary drinks leave residue after evaporation. Water damage from these spills needs prompt professional repair or assessment, not a wait for drying agents.

In workshop cases, a water-damaged phone can look normal at first, even after full immersion. A drowned phone may develop charging trouble or a flickering screen days later.

A dry exterior doesn’t prove dry internals, and evaporation doesn’t remove corrosive deposits.

For iPhone component faults after a watery drop, you can book an iPhone repair for diagnosis. For Samsung faults, Book a Samsung Repair rather than assuming the battery needs replacing.

Google Pixel and iPad diagnosis follows the same principle. A device that won’t turn on or charge needs power-system checks. Display fault symptoms can involve the screen, its connections or the mainboard.

Questions about drying a wet phone

How long should an iPhone dry before charging?

Apple says connector drying can take up to 24 hours. However, that doesn’t certify a submerged phone’s internals as safe. Don’t override liquid warnings or treat wireless charging as a workaround after immersion.

Can the photos and files survive?

They can, but recovery depends on the damage. Don’t power on a wet phone for a backup. If it’s already dry, stable and working normally, back up promptly. Tell the technician if data recovery is your priority.

Give the phone a better chance

Rice delays diagnosis without cleaning the damage that matters. Keep the device switched off and arrange a diagnosis if contamination or symptoms suggest internal damage.

If you’re unsure what’s wrong, get in touch with Phone Repair Direct. We can help you decide the next step without guessing which component needs replacing.