Skip to content
5,000+ phones repaired • FREE tracked Royal Mail postage • Warranty on every repair • Need help?
5,000+ phones repaired FREE tracked Royal Mail postage Warranty on every repair (terms) Harlow workshop • UK-wide postal repairs Need help? Contact us

MacBook Camera Not Working: Settings or Hardware?

29/10/2026 by James Waterston

A MacBook camera that isn’t working can have a permissions problem, a stuck app or a hardware fault. We recommend testing it first in a built-in camera app: a working preview makes complete camera failure unlikely.

A black screen from your Mac camera before a meeting is frustrating, but it doesn’t automatically mean you need replacement parts. Compare apps before trying resets, then work through the checks below in order.

Key takeaways

  • Check camera permissions and Screen Time restrictions before assuming the camera has failed.
  • Quit competing video apps, restart, then test Photo Booth before reopening your meeting software.
  • A camera missing from System Information after restarting deserves further investigation, especially after a drop, spill or recent repair.

1. Check camera permissions and restrictions

A laptop with a blank dark screen rests on a table with a green indicator light near the camera.

Allow the affected app and browser

Open System Settings > Privacy & Security > Camera and enable the affected app. Then quit it completely and reopen it. Apple’s camera access guidance describes these controls.

For Google Meet, allow your browser here and allow camera access for the meeting website within the browser. Also select the built-in camera in the meeting’s video settings. An unplugged webcam or unavailable virtual camera can leave the wrong device selected.

If an app isn’t listed, open its video feature to trigger a permission request. Built-in apps such as Photo Booth don’t necessarily appear alongside third-party apps.

Look for Screen Time limits

On macOS Catalina or later, open Screen Time and inspect Content & Privacy > App Restrictions, sometimes labelled Apps. Make sure Camera is allowed. Also check whether an app limit is blocking the calling app.

On older macOS versions, these controls sit in System Preferences rather than System Settings. A work or school Mac may also have an administrator-imposed restriction. A replacement camera won’t resolve that, so involve your IT team if controls are locked.

2. Free the camera and compare apps

Close competing video apps

Treat camera access as one app at a time whilst troubleshooting. Quit FaceTime, Zoom, Teams and browsers running Google Meet, rather than merely closing their windows.

If an app won’t quit, press Option + Command + Escape and force quit that named app. Alternatively, open Activity Monitor, search for its name and stop it there. Don’t terminate unfamiliar system processes.

On supported macOS versions, Control Centre can identify camera access. This helps narrow down which app remains active when the green indicator stays on.

Test Photo Booth before reopening everything

Open it on its own. Remove any camera cover, then check whether you get a live picture. If you do, return to the failing app’s permissions, camera selection and updates.

For example, a working preview there alongside a black Zoom preview points towards Zoom’s settings or software. Conversely, failure there and in FaceTime after restarting needs broader investigation.

A “camera in use” message points towards contention. “There is no connected camera” means the app can’t access a camera, but doesn’t prove physical damage.

3. Restart before using Terminal

Restart and install relevant updates

Save your work and restart your Mac. Reopen Photo Booth first, before launching other video apps or restoring browser tabs.

Next, install available updates for the affected app and macOS. On current versions, macOS updates sit under System Settings > General > Software Update.

Remove clip-on accessories and gently clean the camera window with a dry microfibre cloth. Fingerprints usually cause haze rather than a completely black preview. An opaque cover, however, can block the image altogether.

Restart older camera processes

On some macOS versions, Terminal can stop a stuck camera service so macOS starts it again when needed. This is an optional step, not a universal fix for modern Macs.

Quit camera apps, open Terminal and enter sudo killall VDCAssistant. Another commonly cited command is sudo killall AppleCameraAssistant.

Press Return after each command. Terminal may request your admin password; no characters appear whilst you type it.

“No matching processes were found” means that process wasn’t running or isn’t present on that macOS version. Don’t keep repeating commands if restarting hasn’t changed anything.

4. Use the reset for your MacBook model

Check Apple menu > About This Mac. “Chip” identifies Apple silicon; “Processor” identifies an Intel-based Mac.

Apple silicon: shut down fully

M-series MacBooks don’t use the traditional user-performed SMC reset. Shut down fully, leave the charger connected, wait around 30 seconds, then switch on again.

Intel SMC keyboard combinations don’t apply. Neither does the traditional NVRAM startup-key reset, because Apple silicon handles those settings differently.

Intel: distinguish T2 and older models

The SMC manages power-related functions. Its reset doesn’t erase your files, but the sequence depends on the hardware.

For an Intel MacBook with a T2 chip, shut down. Hold left Control + left Option + right Shift for seven seconds. Keep holding them and add power for another seven seconds. Release everything, wait a few seconds, then start normally.

For an Intel notebook with a non-removable battery and no T2 chip, shut down. Hold left Shift + left Control + left Option + power for ten seconds. Release everything, then press power normally.

Older removable-battery models use a different procedure. A ten-second power-button hold alone isn’t the full T2 SMC reset.

An optional Intel NVRAM reset uses Option + Command + P + R immediately after switching on, held for about 20 seconds. Apple’s startup keyboard combinations distinguish these controls. NVRAM concerns stored startup settings, so we wouldn’t make it the first response to an app-only camera fault.

5. Separate account problems from startup software

Try a fresh user account

Open System Settings > Users & Groups and add a temporary standard user, using administrator approval when prompted. Log out of your usual account, sign into the new one and test Photo Booth.

If it works there, your normal account’s settings or software deserve attention before hardware replacement. A fresh account doesn’t prove every component is healthy, but it gives you a useful comparison without erasing your files.

Record the result before removing the temporary account.

Use Safe Mode as supporting evidence

On Apple silicon, shut down and hold power until startup options appear. Select the startup disk, hold Shift and choose Continue in Safe Mode.

On Intel, switch on and immediately hold Shift until the login window appears. You may need to log in twice.

Safe Mode helps investigate startup software, including login items and virtual-camera tools. However, camera availability can differ in Safe Mode. A failed preview there alone doesn’t prove hardware damage. Restart normally and retest after investigating recent software changes.

6. Check whether macOS detects the camera

An illustration of an open laptop cutaway showing internal components like the camera module and circuit board.

Open System Information

Hold Option whilst opening the Apple menu, then select System Information. Under Hardware, select Camera. A detected device may appear as “FaceTime HD Camera” or another model-specific name.

“No video capture devices were found” means macOS isn’t detecting a camera. If that persists after restarting, hardware becomes more likely, although the message doesn’t identify the failed part.

A camera module, connection or board fault can produce similar symptoms. Mention any recent display repair, drop or liquid exposure. Don’t flex the lid or open the display assembly to investigate.

Run Apple Diagnostics and record the result

Disconnect unnecessary accessories, connect the charger and place the MacBook on a firm, ventilated surface.

On Apple silicon, hold power until startup options appear, release it, then hold Command + D. On Intel, switch on and immediately hold D. Apple’s Diagnostics instructions cover both routes.

Codes NDC001, NDC003, NDC004, NDC005 and NDC006 can flag camera-related issues. Record the code and description. A clean result doesn’t rule out an intermittent connection fault.

A camera entry in System Information proves detection, not image quality. A clean diagnostic result also doesn’t rule out every intermittent fault.

If the camera indicator light shows a flashing green light, follow Apple’s camera troubleshooting guidance and seek service. If the green light stays on after you close apps, an app or service may still be using the camera.

7. Get through the next call without guessing at repairs

An external webcam, such as the Logitech C920, bypasses the built-in camera. Connect it directly whilst testing, avoiding a suspect hub, and select it in the calling app.

If an external camera also fails, check its cable, port, permissions and device selection. That result doesn’t automatically condemn the built-in camera.

You can also use Apple’s Continuity Camera feature with a compatible iPhone running iOS 16 or later and a compatible Mac running macOS Ventura or later.

Neither workaround confirms which internal part has failed. However, either can keep meetings going whilst you arrange diagnosis. Back up before handing the MacBook over, and provide your test results rather than requesting a camera replacement based only on a black preview.

Frequently asked questions

Will these camera resets delete files?

Changing permissions, restarting camera processes, restarting the Mac and performing the appropriate SMC or NVRAM reset don’t erase your documents or photos. A factory reset is different and isn’t part of this checklist.

Can poor Wi-Fi make the camera stop working?

Poor connectivity can disrupt a call, but it won’t explain a black offline Photo Booth preview. FaceTime needs at least 128 kbps for standard video and 1 Mbps for HD. Zoom group HD requirements vary, roughly 1.5 to 3.8 Mbps depending on quality and upload or download direction.

Are these instructions suitable for an iPad?

The diagnostic principle is similar, but the settings and reset procedures differ. Use our iPad camera troubleshooting steps for tablet-specific permission and hardware checks. Mac Terminal commands and SMC sequences don’t apply to an iPad.

Get a diagnosis before replacing parts

A working preview in that built-in app makes an app problem more likely. Failure across apps, missing camera detection or symptoms following physical damage make hardware failure more likely and justify a hardware assessment.

If those checks leave you unsure, speak to our team at Phone Repair Direct before booking. Share the error message, affected apps and diagnostic results so the next step addresses the fault rather than guessing at parts.